unisonic technologies co., ltd 2sd2136 npn silicon transistor www.unisonic.com.tw 1 of 4 copyright ? 2014 unisonic technologies co., ltd qw-r204-011.e power transistor ? description the utc 2sd2136 is designed for power application. ? features * high forward current transfer ratio h fe which has satisfactory linearity. * low collector to emitter saturation voltage v ce(sat) . * allowing supply with the radial taping. ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 - 2sd2136g-x-aa3-r sot-223 b c e tape reel 2sd2136l-x-t60-k 2sd2136g-x-t60-k to-126 b c e bulk 2sd2136l-x-t6c-k 2sd2136g-x-t6c-k to-126c b c e bulk 2sd2136l-x-t6s-k 2SD2136G-X-T6S-K to-126s b c e bulk note: pin assignment: e: emitter b: base c: collector ? marking sot-223 to-126 / to-126c / to-126s
2sd2136 npn silicon transistor unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r204-011.e ? absolute maximum ratings (t a =25 , unless otherwise specified ) parameter symbol ratings unit collector-base voltage v cbo 60 v collector-emitter voltage v ceo 60 v emitter-base voltage v ebo 6 v collector current i c 3 a peak collector current i cp 5 a collector dissipation sot-223 p c 1 w to-126/to-126c to-126s 1.5 w junction temperature t j 150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified ) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv ceo i c =30ma, i b =0 60 v collect cutoff current i ceo v ce =60v, i b =0 300 a collect cutoff current i ces v ce =60 v, v be =0 200 a emitter cutoff current i ebo v eb =6 v, i c =0 1 ma dc current gain h fe1 v ce =4v ,i c =1a 40 250 h fe2 v ce =4v ,i c =3a 10 collector-emitter satu ration voltage v ce ( sat ) i c =3a, i b =0.375a 1.2 v base-emitter voltage v be v ce =4v ,i c =3a 1.8 v current gain bandwidth product f t v ce =15v, i e =0.1a, f =200mhz 220 mh z turn on time t on i c = 1a, i b1 =0.1a, i b2 =0.1a 0.5 s storage time t s 2.5 s fall time t f 0.4 s ? classification of h fe1 rank p q r range 40-90 70-150 120-250
2sd2136 npn silicon transistor unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r204-011.e ? typical characteristics t c =25 i b =100ma 10ma 20ma 30ma 40ma 50ma 60ma 70ma 80ma 90ma 0 1 2 3 4 5 024681012 collector emitter voltage, v ce (v) collector current, i c (a) t c =25 t c =100 t c =-25 v ce =4v i c -v be collector current, i c (a) 5 6 7 8 4 3 2 1 0 0 0.4 0.8 1.2 1.6 2.0 2.4 base emitter voltage, v be (v) i c -v ce without head sink 2.0 1.2 1.6 0.8 0.4 0 0 20 40 60 80 100 120 140 160 ambient temperature, t a ( ) collector power dissipation, p c (w) p c -t a t c =100 t c =25 t c =-25 0.3 0.1 1 3 10 0.03 0.01 0.01 0.03 0.1 0.3 1 3 10 30 100 collector current, i c (a) collector to emitter saturation voltage, v ce(sat) (v) v ce(sat) -i c t c =100 t c =25 t c =-25 v ce =4v 10k 1k 3k 0.3k 0.1k 30 10 3 1 0.01 0.03 0.1 0.3 1 3 10 collector current, i c (a) forward current transfer ratio, h fe h fe -i c v cb =10v t c =25 f=200mh z 300 250 200 150 100 50 0 -0.01 -0.03 -0.1 -0.3 -1 -3 -10 collector current, i c (a) transtion frequency, f t (mh z ) f t -i c
2sd2136 npn silicon transistor unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r204-011.e ? typical characteristics(cont.) collector current, i c (a) thermal resistance, r th (t) ( ? /w) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
